From ff9c3a9bf6b0974bf31b40a851b39d8cc08f604d Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 15:49:43 +0700
Subject: [PATCH 1/8] Add open-source license information (#1)
---
LICENSE | 165 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
README.md | 11 +++-
2 files changed, 175 insertions(+), 1 deletion(-)
create mode 100644 LICENSE
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..0a04128
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,165 @@
+ GNU LESSER GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+ This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+ 0. Additional Definitions.
+
+ As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+ "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+ An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+ A "Combined Work" is a work produced by combining or linking an
+Application with the Library. The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+ The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+ The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+ 1. Exception to Section 3 of the GNU GPL.
+
+ You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+ 2. Conveying Modified Versions.
+
+ If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+ a) under this License, provided that you make a good faith effort to
+ ensure that, in the event an Application does not supply the
+ function or data, the facility still operates, and performs
+ whatever part of its purpose remains meaningful, or
+
+ b) under the GNU GPL, with none of the additional permissions of
+ this License applicable to that copy.
+
+ 3. Object Code Incorporating Material from Library Header Files.
+
+ The object code form of an Application may incorporate material from
+a header file that is part of the Library. You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+ a) Give prominent notice with each copy of the object code that the
+ Library is used in it and that the Library and its use are
+ covered by this License.
+
+ b) Accompany the object code with a copy of the GNU GPL and this license
+ document.
+
+ 4. Combined Works.
+
+ You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+ a) Give prominent notice with each copy of the Combined Work that
+ the Library is used in it and that the Library and its use are
+ covered by this License.
+
+ b) Accompany the Combined Work with a copy of the GNU GPL and this license
+ document.
+
+ c) For a Combined Work that displays copyright notices during
+ execution, include the copyright notice for the Library among
+ these notices, as well as a reference directing the user to the
+ copies of the GNU GPL and this license document.
+
+ d) Do one of the following:
+
+ 0) Convey the Minimal Corresponding Source under the terms of this
+ License, and the Corresponding Application Code in a form
+ suitable for, and under terms that permit, the user to
+ recombine or relink the Application with a modified version of
+ the Linked Version to produce a modified Combined Work, in the
+ manner specified by section 6 of the GNU GPL for conveying
+ Corresponding Source.
+
+ 1) Use a suitable shared library mechanism for linking with the
+ Library. A suitable mechanism is one that (a) uses at run time
+ a copy of the Library already present on the user's computer
+ system, and (b) will operate properly with a modified version
+ of the Library that is interface-compatible with the Linked
+ Version.
+
+ e) Provide Installation Information, but only if you would otherwise
+ be required to provide such information under section 6 of the
+ GNU GPL, and only to the extent that such information is
+ necessary to install and execute a modified version of the
+ Combined Work produced by recombining or relinking the
+ Application with a modified version of the Linked Version. (If
+ you use option 4d0, the Installation Information must accompany
+ the Minimal Corresponding Source and Corresponding Application
+ Code. If you use option 4d1, you must provide the Installation
+ Information in the manner specified by section 6 of the GNU GPL
+ for conveying Corresponding Source.)
+
+ 5. Combined Libraries.
+
+ You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+ a) Accompany the combined library with a copy of the same work based
+ on the Library, uncombined with any other library facilities,
+ conveyed under the terms of this License.
+
+ b) Give prominent notice with the combined library that part of it
+ is a work based on the Library, and explaining where to find the
+ accompanying uncombined form of the same work.
+
+ 6. Revised Versions of the GNU Lesser General Public License.
+
+ The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+ If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
diff --git a/README.md b/README.md
index 8489747..44549a2 100644
--- a/README.md
+++ b/README.md
@@ -1,3 +1,12 @@
# Sonar Scanner CLI Image
-Sonar Scanner CLI bundled in a container image.
\ No newline at end of file
+> Sonar Scanner CLI bundled in a container image.
+
+## Maintainers
+
+- [Daya Adianto](https://gitlab.com/addianto)
+
+## License
+
+Copyright (c) 2019 Faculty of Computer Science Universitas Indonesia. Licensed
+under the [GNU Lesser General Public, Version 3.0](LICENSE).
--
GitLab
From 2226913585b42b0e9d4692fa2a9255a943d846bc Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 15:50:18 +0700
Subject: [PATCH 2/8] Add EditorConfig file (#1)
---
.editorconfig | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 .editorconfig
diff --git a/.editorconfig b/.editorconfig
new file mode 100644
index 0000000..2366c51
--- /dev/null
+++ b/.editorconfig
@@ -0,0 +1,8 @@
+# EditorConfig configuration file
+root = true
+
+[*]
+charset = utf-8
+end_of_line = lf
+indent_style = space
+insert_final_newline = true
--
GitLab
From f998e7989beda7e2e1ddd3e1d4605f302d8ea995 Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 15:50:42 +0700
Subject: [PATCH 3/8] Add VS Code development container configuration (#1)
---
.devcontainer/Dockerfile | 36 +++++++++++++++++++++++++++++++++
.devcontainer/devcontainer.json | 30 +++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
create mode 100644 .devcontainer/Dockerfile
create mode 100644 .devcontainer/devcontainer.json
diff --git a/.devcontainer/Dockerfile b/.devcontainer/Dockerfile
new file mode 100644
index 0000000..66387aa
--- /dev/null
+++ b/.devcontainer/Dockerfile
@@ -0,0 +1,36 @@
+#-------------------------------------------------------------------------------------------------------------
+# Copyright (c) Microsoft Corporation. All rights reserved.
+# Licensed under the MIT License. See https://go.microsoft.com/fwlink/?linkid=2090316 for license information.
+#-------------------------------------------------------------------------------------------------------------
+FROM debian:9
+
+# Avoid warnings by switching to noninteractive
+ENV DEBIAN_FRONTEND=noninteractive
+
+# Or your actual UID, GID on Linux if not the default 1000
+ARG USERNAME=vscode
+ARG USER_UID=1000
+ARG USER_GID=$USER_UID
+
+# Configure apt and install packages
+RUN apt-get update \
+ && apt-get -y install --no-install-recommends apt-utils dialog 2>&1 \
+ #
+ # Verify git, process tools, lsb-release (common in install instructions for CLIs) installed
+ && apt-get -y install git procps lsb-release \
+ #
+ # Create a non-root user to use if preferred - see https://aka.ms/vscode-remote/containers/non-root-user.
+ && groupadd --gid $USER_GID $USERNAME \
+ && useradd -s /bin/bash --uid $USER_UID --gid $USER_GID -m $USERNAME \
+ # [Optional] Uncomment the next three lines to add sudo support
+ # && apt-get install -y sudo \
+ # && echo $USERNAME ALL=\(root\) NOPASSWD:ALL > /etc/sudoers.d/$USERNAME \
+ # && chmod 0440 /etc/sudoers.d/$USERNAME \
+ #
+ # Clean up
+ && apt-get autoremove -y \
+ && apt-get clean -y \
+ && rm -rf /var/lib/apt/lists/*
+
+# Switch back to dialog for any ad-hoc use of apt-get
+ENV DEBIAN_FRONTEND=
diff --git a/.devcontainer/devcontainer.json b/.devcontainer/devcontainer.json
new file mode 100644
index 0000000..de9ed56
--- /dev/null
+++ b/.devcontainer/devcontainer.json
@@ -0,0 +1,30 @@
+// For format details, see https://aka.ms/vscode-remote/devcontainer.json or the definition README at
+// https://github.com/microsoft/vscode-dev-containers/tree/master/containers/debian-9-git
+{
+ "name": "Sonar Scanner CLI Image",
+ "dockerFile": "Dockerfile",
+
+ // The optional 'runArgs' property can be used to specify additional runtime arguments.
+ "runArgs": [
+ // Uncomment the line if you will use a ptrace-based debugger like C++, Go, and Rust.
+ // "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined",
+
+ // Uncomment the next line to use a non-root user. See https://aka.ms/vscode-remote/containers/non-root-user.
+ // "-u", "1000"
+ ],
+
+ // Uncomment the next line if you want to publish any ports.
+ // "appPort": [],
+
+ // Uncomment the next line to automatically install extensions.
+ // "extensions": [ "eamodio.gitlens" ],
+
+ // Uncomment the next line if you want to add in default container specific settings.json values
+ // "settings": { "workbench.colorTheme": "Quiet Light" },
+
+ // Uncomment the next line to run commands after the container is created.
+ // "postCreateCommand": "uname -a",
+
+ // Add the IDs of any extensions you want installed in the array below.
+ "extensions": []
+}
\ No newline at end of file
--
GitLab
From 6ce8d2b86a8bdf3df0475d080633d885845519c1 Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 15:50:58 +0700
Subject: [PATCH 4/8] Add .gitignore file (#1)
---
.gitignore | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 .gitignore
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..30698f2
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,15 @@
+# Created by https://www.gitignore.io/api/visualstudiocode
+# Edit at https://www.gitignore.io/?templates=visualstudiocode
+
+### VisualStudioCode ###
+.vscode/*
+!.vscode/settings.json
+!.vscode/tasks.json
+!.vscode/launch.json
+!.vscode/extensions.json
+
+### VisualStudioCode Patch ###
+# Ignore all local history of files
+.history
+
+# End of https://www.gitignore.io/api/visualstudiocode
--
GitLab
From a181cc3dafafd3f86869cda5dad6fd70eb5f1c8a Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 16:18:48 +0700
Subject: [PATCH 5/8] Update VS Code development container configuration (#1)
---
.devcontainer/Dockerfile | 10 +++++++++-
.devcontainer/devcontainer.json | 17 ++++++++++-------
2 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/.devcontainer/Dockerfile b/.devcontainer/Dockerfile
index 66387aa..8d87309 100644
--- a/.devcontainer/Dockerfile
+++ b/.devcontainer/Dockerfile
@@ -17,7 +17,10 @@ RUN apt-get update \
&& apt-get -y install --no-install-recommends apt-utils dialog 2>&1 \
#
# Verify git, process tools, lsb-release (common in install instructions for CLIs) installed
- && apt-get -y install git procps lsb-release \
+ && apt-get -y install --no-install-recommends git procps lsb-release \
+ #
+ # Install project-specific tools
+ && apt-get -y install --no-install-recommends ca-certificates shellcheck wget \
#
# Create a non-root user to use if preferred - see https://aka.ms/vscode-remote/containers/non-root-user.
&& groupadd --gid $USER_GID $USERNAME \
@@ -32,5 +35,10 @@ RUN apt-get update \
&& apt-get clean -y \
&& rm -rf /var/lib/apt/lists/*
+# Configure hadolint
+ARG HADOLINT_VERSION=v1.17.1
+RUN wget -O /usr/local/bin/hadolint https://github.com/hadolint/hadolint/releases/download/${HADOLINT_VERSION}/hadolint-Linux-x86_64 \
+ && chmod +x /usr/local/bin/hadolint
+
# Switch back to dialog for any ad-hoc use of apt-get
ENV DEBIAN_FRONTEND=
diff --git a/.devcontainer/devcontainer.json b/.devcontainer/devcontainer.json
index de9ed56..98f075b 100644
--- a/.devcontainer/devcontainer.json
+++ b/.devcontainer/devcontainer.json
@@ -16,15 +16,18 @@
// Uncomment the next line if you want to publish any ports.
// "appPort": [],
- // Uncomment the next line to automatically install extensions.
- // "extensions": [ "eamodio.gitlens" ],
-
- // Uncomment the next line if you want to add in default container specific settings.json values
- // "settings": { "workbench.colorTheme": "Quiet Light" },
+ "settings": {
+ "hadolint.hadolintPath": "hadolint",
+ "shellcheck.enable": true,
+ "shellcheck.executablePath": "shellcheck"
+ },
// Uncomment the next line to run commands after the container is created.
// "postCreateCommand": "uname -a",
- // Add the IDs of any extensions you want installed in the array below.
- "extensions": []
+ "extensions": [
+ "exiasr.hadolint",
+ "ms-azuretools.vscode-docker",
+ "timonwong.shellcheck",
+ ],
}
\ No newline at end of file
--
GitLab
From ce595460000f130dc885e4dda7ea1326fd8643e8 Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 17:30:33 +0700
Subject: [PATCH 6/8] Add hadolint configuration (#1)
---
.hadolint.yaml | 3 +++
1 file changed, 3 insertions(+)
create mode 100644 .hadolint.yaml
diff --git a/.hadolint.yaml b/.hadolint.yaml
new file mode 100644
index 0000000..b138ee2
--- /dev/null
+++ b/.hadolint.yaml
@@ -0,0 +1,3 @@
+---
+ignored:
+ - DL3008
\ No newline at end of file
--
GitLab
From 8cf1300a25a898f3df5cec0d8cbb99031559242b Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 17:31:07 +0700
Subject: [PATCH 7/8] Create Dockerfile (#1)
---
Dockerfile | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Dockerfile
diff --git a/Dockerfile b/Dockerfile
new file mode 100644
index 0000000..106cebe
--- /dev/null
+++ b/Dockerfile
@@ -0,0 +1,53 @@
+FROM debian:10-slim
+
+# Avoid warnings by switching to noninteractive
+ENV DEBIAN_FRONTEND=noninteractive
+
+# Or your actual UID, GID on Linux if not the default 1000
+ARG USERNAME=sonar
+ARG USER_UID=1000
+ARG USER_GID=$USER_UID
+
+# Install packages
+RUN apt-get update \
+ && apt-get -y install --no-install-recommends ca-certificates git nodejs unzip wget \
+ # Create a non-root user to use if preferred - see https://aka.ms/vscode-remote/containers/non-root-user.
+ && groupadd --gid $USER_GID $USERNAME \
+ && useradd -s /bin/bash --uid $USER_UID --gid $USER_GID -m $USERNAME \
+ # Clean up
+ && apt-get autoremove -y \
+ && apt-get clean -y \
+ && rm -rf /var/lib/apt/lists/*
+
+# Install Sonar Scanner CLI
+ARG SONAR_SCANNER_CLI_VERSION=4.0.0.1744
+RUN wget -O sonar-scanner-cli.zip https://binaries.sonarsource.com/Distribution/sonar-scanner-cli/sonar-scanner-cli-$SONAR_SCANNER_CLI_VERSION-linux.zip \
+ && unzip sonar-scanner-cli.zip -d /opt \
+ && rm sonar-scanner-cli.zip \
+ && chmod +x /opt/sonar-scanner-$SONAR_SCANNER_CLI_VERSION-linux/bin/sonar-scanner \
+ && ln -s /opt/sonar-scanner-$SONAR_SCANNER_CLI_VERSION-linux/bin/sonar-scanner /usr/local/bin/sonar-scanner
+
+# Switch back to dialog for any ad-hoc use of apt-get
+ENV DEBIAN_FRONTEND=''
+
+## Note to editors: Make sure name of USER and its WORKDIR path matches with
+## the value of USERNAME above
+USER sonar
+WORKDIR /home/sonar
+
+ENTRYPOINT ["/bin/bash"]
+
+# Container image metadata
+## Note to editors: metadata values for `created`, `version`, `revision`, and
+## `ref.name` keys must be provided during build process, i.e. `docker build`
+## invocation
+LABEL org.opencontainers.image.created=""
+LABEL org.opencontainers.image.authors="Daya Adianto <dayaadianto@cs.ui.ac.id>"
+LABEL org.opencontainers.image.source="https://gitlab.cs.ui.ac.id/pmpl/sonar-scanner-cli-image"
+LABEL org.opencontainers.image.version=""
+LABEL org.opencontainers.image.revision=""
+LABEL org.opencontainers.image.vendor="Faculty of Computer Science Universitas Indonesia"
+LABEL org.opencontainers.image.licenses="LGPL-3.0"
+LABEL org.opencontainers.image.ref.name=""
+LABEL org.opencontainers.image.title="Sonar Scanner CLI Image"
+LABEL org.opencontainers.image.description="Sonar Scanner CLI bundled in a container image"
--
GitLab
From 8435ba2530488e7432e45636951b9a9f5f25d77e Mon Sep 17 00:00:00 2001
From: Daya Adianto <dayaadianto@cs.ui.ac.id>
Date: Thu, 29 Aug 2019 17:57:47 +0700
Subject: [PATCH 8/8] Add CODEOWNERS file (#1)
---
.gitlab/CODEOWNERS | 4 ++++
1 file changed, 4 insertions(+)
create mode 100644 .gitlab/CODEOWNERS
diff --git a/.gitlab/CODEOWNERS b/.gitlab/CODEOWNERS
new file mode 100644
index 0000000..aa65218
--- /dev/null
+++ b/.gitlab/CODEOWNERS
@@ -0,0 +1,4 @@
+# Code Owners
+
+## Default owners
+* @addianto
--
GitLab